Cold cut large diameter steel pipe, most stainless steel, ductile iron and cast iron pipe. Suitable for small space operation. Each pipe cutter is equipped with a movable handle, which can be used to pull the pipe cutter in one direction. The handle can also tighten the feed nut once every half turn of the pipe cutter. Rotary pipe cutting machine is the tool of choice for cutting ductile iron pipes, because the handle is long and labor-saving, and when the pipe wall is cut through half, the pipe will basically break. Pipe cutting machine frame solid firm. All rotary pipe cutters use one type of blade. When cutting steel and stainless steel, use RCS8-36 blades; when cutting ductile iron and cast iron, use RCI8-30 blades. The RCX blade is used to cut thick-walled tubes.
Small space rotary tube cutting
Can be cold cut large diameter steel, most stainless steel, ductile iron and cast iron pipe, and can be operated in a small space. 18 inch diameter rotary pipe cutting machine operation only 5 inch space. The new design of the rack makes the tool more robust. Each pipe cutter is equipped with a movable handle to assist in rotating the pipe cutter in one direction during cutting. At the same time, the handle can tighten the feed nut once every half turn of the pipe cutter.
Articulated pipe cutting machine with auxiliary handle
The articulated pipe cutting machine uses an auxiliary handle, which can be operated by two workers at the same time. This tool is especially suitable for difficult working environments, such as oil and casing and process piping. The articulated pipe cutting machine uses four blades to simultaneously cold cut carbon steel, stainless steel, cast iron and ductile iron pipes. The handle only needs to swing 90 to 110 degrees back and forth. Sturdy guide frame ensures straight cutting. The 360-degree closed design makes the operation time-saving and effective.
Articulated pipe cutting machine
The articulated pipe cutting machine is suitable for various working environments, such as in trenches, underwater, above the head and between pipe rows. Suitable for steel pipe, stainless steel pipe, cast iron and ductile iron pipe. When cutting, four blades cut at the same time, and the handle only needs to swing 90 to 110 degrees back and forth. Only 4 inches of operating space around the pipe. The pipe cutting machine is a 360-degree closed design, so the operation is time-saving and effective. The cutting belongs to cold cutting without spark.
